Avaya 3050-VM Скачать руководство пользователя страница 178

Страница: 178 / 274

Bad regular expression found in health check script. Reconfigure. This should normally
be captured earlier by the CLI.

• Bad script op found <script op>

Bad script operation found in health check script. Reconfigure. This should normally be
captured earlier by the CLI.

• Bad string found <string>

Bad load balancing string encountered. This is normally verified by the CLI.

• Unable to use the certificate for <server nr>

Unsuitable certificate configured for server #.

• The private key and certificate don't match for <server nr>

Key and certificate does not match for server #. The certificate has to be changed.

• Unable to use client private key for <server #>

Key for doing sslconnect is not valid. Reconfigure.

• Unable to find client private key for <server #>

Key for doing sslconnect is not valid. Reconfigure.

• Unable to use client certificate for <server #>

Certificate for doing sslconnect is not valid. Reconfigure.

• Failed to initialize SSL hardware

Problem initializing SSL acceleration hardware. This will cause the VPN Gateway to run
with degraded performance.

• Could not find SSL hardware.

Failed to detect SSL acceleration hardware.

• Connect failed: <reason>

Connect to backend server failed with <reason>

• SSL connect failed: <reason>

SSL connect to backend server failed with <reason>

• html error: <reason>

Error encountered when parsing HTML. Probably non-standard HTML.

• socks error: <reason>

Error encountered when parsing the socks traffic from the client. Probably a non-standard
socks client.

• socks request: socks version <version> rejected

Syslog Messages

178 User Guide

April 2013

Comments? [email protected]

Содержание 3050-VM



















































































































































































































































































Результаты поиска

Содержание 3050-VM

Отзывы:

Avaya 3050-VM, Руководство пользователя, Страница: 178 / 274

Результаты поиска

Содержание 3050-VM

Отзывы: