Avaya 3050-VM Скачать руководство пользователя страница 183

Страница: 183 / 274

Virtual server configuration reloading start.

• reload configuration network down

Accepting new sessions are temporarily put on hold.

• reload configuration network up

Resuming accepting new sessions after loading new configuration.

• reload configuration done

Virtual server configuration reloading done.

AAA Subsystem Messages

The AAA (Authentication, Authorization and Accounting) subsystem messages are divided into
these categories:

• ERROR

• WARNING

• INFO

ERROR

LDAP backend(s) unreachable Vpn=\"<id>\" AuthId=\"<authid>\"

In case LDAP server(s) cannot be reached when a user tries to login to the Portal.

WARNING

Host <host ip> has been down too long: is no longer accounted for in the license pool.

The host has been down too long (more than 30 days) and is no longer accounted for in the
license pool.

INFO

Host <host ip> is up: accounted for in the license pool.

A host that has been down too long is up again and is now sharing its licenses in the license

pool.

Log functionality

Messages listed are generated if the CLI command

/cfg/vpn #/adv/log

is enabled.

If the log value contains

List of Syslog Messages

User Guide

April 2013 183

Содержание 3050-VM



















































































































































































































































































Результаты поиска

Содержание 3050-VM

Отзывы:

Avaya 3050-VM, Руководство пользователя, Страница: 183 / 274

Результаты поиска

Содержание 3050-VM

Отзывы: