manualshive.com logo in svg

Avaya 3050-VM, Руководство пользователя, Страница: 142 / 274

Поделиться
Скачать
Avaya 3050-VM Скачать руководство пользователя страница 142

(new setup, continued)

Card 1 successfully initialized.

Should new or existing CODE iKeys be used? (new/existing) 
[new]:

existing

3. Transfer the cluster wrap key from the existing CODE-SO and CODE-USER iKeys

to card 0.

Make sure you use the same pair of CODE-SO and CODE-USER iKeys that were

used in the former cluster of ASA 310-FIPS devices.

(new setup, continued)

Verify that CODE-SO iKey (black) is inserted in card 0 (with 

flashing LED).

Hit enter when done.

Verify that HSM-USER iKey (blue) is inserted in card 0 (with 

flashing LED).

Hit enter when done.

Verify that CODE-USER iKey (black) is inserted in card 0 (with 

flashing LED).

Hit enter when done.

Wrap key successfully combined to card 0.

4. Transfer the cluster wrap key from the CODE-SO and CODE-USER iKeys to card

1.

(new setup, continued)

Verify that CODE-SO iKey (black) is inserted in card 1 (with 

flashing LED).

Hit enter when done.

Verify that HSM-USER iKey (blue) is inserted in card 1 (with 

flashing LED).

Hit enter when done.

Verify that CODE-USER iKey (black) is inserted in card 1 (with 

flashing LED).

Hit enter when done.

Wrap key successfully split combined to card 1.

5. If you selected FIPS mode as the security mode, specify the passphrase.

Enter the same secret passphrase as was defined in the former cluster running in

FIPS mode. This step only appears if you selected FIPS mode when initializing the

HSM cards.

(new setup, continued)

Enter the old secret passphrase (it is used during addition of 

new iSDs to the cluster):

<Enter the same secret passphrase as was 

used in the former cluster.>

Re-enter to confirm:

6. Wait for the initial setup of the first ASA 310-FIPS in the cluster to finish.

Troubleshooting the AVG

142     User Guide

April 2013

Comments? [email protected]

Содержание 3050-VM



















































































































































































































































































Отзывы:

Нет отзывов