Avaya 3050-VM Скачать руководство пользователя страница 182

Страница: 182 / 274

Transparent proxy mode is disabled due to pooling being enabled (startup message).

• Set CSWIFT as default

Using CSWIFT SSL hardware acceleration. (startup message).

• Using <hwtype> hardware

Using <hwtype> hardware for SSL acceleration. (startup message)

• Loaded <ip>:<port>

Initializing virtual server <ip>:<port>.

• Because we use clicerts, force adjust totalcache size to: <size> per server that use clicerts

Generated if the size of the SSL session cache has been modified.

• No more than <nr> backend supported

Generated when more than the maximum allowed backend servers have been
configured.

• TPS license limit: <limit>

TPS limit set to <limit>

• No TPS license limit

Unlimited TPS license used.

• Started ssl-proxy

Traffic subsystem started.

• Found <size> meg of phys mem

Amount of physical memory found on system.

Configuration Reload Messages

The Traffic Subsystem Configuration Reload messages only include the INFO category.

INFO

• reload cert config start

Starting reloading of certificates.

• reload cert config done

Certificate reloading done.

• reload configuration start

Syslog Messages

182 User Guide

April 2013

Comments? [email protected]

Содержание 3050-VM



















































































































































































































































































Результаты поиска

Содержание 3050-VM

Отзывы:

Avaya 3050-VM, Руководство пользователя, Страница: 182 / 274

Результаты поиска

Содержание 3050-VM

Отзывы: