Avaya 3050-VM Скачать руководство пользователя страница 216

Страница: 216 / 274

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or

executable form under the terms of Sections 1 and 2, preceding, provided that you also do one of the

following:

a) Accompany it with the complete corresponding machine-readable source code, which must be

distributed under the terms of Sections 1 and 2 preceding on a medium customarily used for software

interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party (for a charge no

more than your cost of physically performing source distribution) a complete machine-readable copy of

the corresponding source code, to be distributed under the terms of Sections 1 and 2, preceding, on a

medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code.

(This alternative is allowed only for noncommercial distribution and only if you received the program in

object code or executable form with such an offer, in accordance with Subsection b, preceding.)

The source code for a work means the preferred form of the work for making modifications to it. For an

executable work, complete source code means all the source code for all modules it contains, plus any

associated interface definition files, plus the scripts used to control compilation and installation of the

executable. However, as a special exception, the source code distributed need not include anything that

is normally distributed (in either source or binary form) with the major components (compiler, kernel, and

so on) of the operating system on which the executable runs, unless that component itself accompanies

the executable. If distribution of executable or object code is made by offering access to copy from a

designated place, then offering equivalent access to copy the source code from the same place counts

as distribution of the source code, even though third parties are not compelled to copy the source along

with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under

this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void and will

automatically terminate your rights under this License. However, parties who have received copies, or

rights, from you under this License will not have their licenses terminated so long as such parties remain

in full compliance.

5. You are not required to accept this License, because you have not signed it. However, nothing else

grants you permission to modify or distribute the Program or its derivative works. These actions are

prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program

(or any work based on the Program), you indicate your acceptance of this License to do so, and all its

terms and conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically

receives a license from the original licensor to copy, distribute, or modify the Program subject to these

terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights

granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment, or allegation of patent infringement, or for any other reason

(not limited to patent issues), conditions are imposed on you (whether by court order, agreement or

otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of

this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License

and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For

example, if a patent license not permit royalty-free redistribution of the Program by all those who receive

copies directly or indirectly through you, then the only way you could satisfy both it and this License be to

refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable

License Information

216 User Guide

April 2013

Comments? [email protected]

Содержание 3050-VM



















































































































































































































































































Результаты поиска

Содержание 3050-VM

Отзывы:

Avaya 3050-VM, Руководство пользователя, Страница: 216 / 274

Результаты поиска

Содержание 3050-VM

Отзывы: