manualshive.com logo in svg

Avaya 3050-VM, Руководство пользователя, Страница: 181 / 274

Поделиться
Скачать
Avaya 3050-VM Скачать руководство пользователя страница 181

Problem encountered when processing compressed content.

• accept() turned off (<nr>) too many fds

The VPN Gateway has temporarily stopped accepting new connections. This will happen
when the VPN Gateway is overloaded. It will start accepting connections once it has
finished processing its current sessions.

• No cert supplied by backend server

No certificate supplied by backend server when doing SSL connect. Session terminated
to backend server.

• No CN supplied in server cert <subject>

No CN found in the subject of the certificate supplied by the backend server.

• Bad CN supplied in server cert <subject>

Malformed CN found in subject of the certificate supplied by the backend server.

• Shutting sslproxy down.

Traffic subsystem has been stopped.

• Restarting proxy due to <reason>

Traffic subsystem restarted due to <reason>

• DNS alarm: dns server(s) are UP

At least one DNS server is now up.

• HC: backend <ip>:<port> is down

Backend health check detected backend <ip>:<port> to be down.

• HC: backend <ip>:<port> is up again

Backend health check detected backend <ip>:<port> to be up.

Startup Messages

The Traffic Processing Subsystem Startup messages only include the INFO category.

INFO

• HSM mode: <mode>

Hardware Security Mode <mode>.

• Disabling transparent proxy, non-compatible with pooling

List of Syslog Messages

User Guide

April 2013     181

Содержание 3050-VM



















































































































































































































































































Отзывы:

Нет отзывов