Avaya 3050-VM, Руководство пользователя, Страница: 43 / 274

Enter port number for the management interface [1-4]:
1
This port will be assigned to Interface 1. As you are currently configuring a one-
armed setup, this interface will be used for both private traffic (for example, SSL
VPN management and connections to intranet resources) and public traffic (for
example, client connections from the Internet).
3. Specify the current host IP address of the VPN Gateway.
Enter IP address for this machine (on management interface): <IP
address>
This IP address must be unique on your network and be within the same network
address range as the Management IP address. The host IP address will be assigned
to Interface 1.
You can later use the
/cfg/sys/host 1/interface 1
command to view the
resulting settings for Interface 1.
Note:
If needed, you can later create a two-armed configuration by adding a new
interface to the cluster, exclusively used for client traffic, and assign an unused
port to that interface. For information about how to add a new interface, see the
"Interface Configuration " section under Configuration Menu>System
Configuration in the
Avaya Command Reference . For information about how to
assign ports to an interface, see the "Interface Ports Configuration " section in
the same chapter.
4. Enter network mask and VLAN tag ID.
Enter network mask [255.255.255.0]: <Press ENTER if correct>
Enter VLAN tag id (or zero for no VLAN) [0]: <VLAN tag id or ENTER>
Specify the desired network mask or accept the suggested value by pressing
ENTER. If a connected router or switch attaches VLAN tag IDs to incoming packets,
specify the VLAN tag ID used.
5. Press ENTER to continue with creating a one-armed configuration.
Setup a two armed configuration (yes/no) [no]: <Press ENTER>
6. Enter a default gateway address.
Installing an AVG in a New Cluster
User Guide April 2013 43