manualshive.com logo in svg

Avaya 3050-VM, Руководство пользователя, Страница: 54 / 274

Поделиться
Скачать
Avaya 3050-VM Скачать руководство пользователя страница 54

4. Enter network mask and VLAN tag ID.

Enter network mask [255.255.255.0]:

<Press ENTER if correct>

Enter VLAN tag id (or zero for no VLAN) [0]:

<VLAN tag id or ENTER>

Specify the desired network mask for the host IP address on the management
interface or accept the suggested value by pressing ENTER. If a connected router
or switch attaches VLAN tag IDs to incoming packets, specify the VLAN tag ID
used.

5. Enter 

yes

 and press 

ENTER

 to continue with creating a two-armed configuration.

Setup a two armed configuration (yes/no) [no]:

yes

6. Specify a new port number for the traffic interface.

Enter port number for the traffic interface [1-4]:

2

The traffic interface port number will automatically be assigned to Interface 2.

7. Specify a host IP address and network mask on the traffic interface for the current

VPN Gateway.

Enter IP address for this machine (on traffic interface):

<IP 

address>

Enter network mask [255.255.255.0]:

<press ENTER to accepts>

In a two-armed configuration, the traffic interface host IP address will be assigned
to Interface 2.

8. If a connected router or switch attaches VLAN tag IDs to incoming packets, specify

the VLAN tag ID used.

Enter VLAN tag id (or zero for no VLAN) [0]:

9. Enter the Management IP address (MIP) of the existing cluster.

The system is initialized by connecting to the management server 

on an existing iSD, which must be operational and initialized.

Enter the Management IP (MIP) address:

<IP address>

Initial Setup

54     User Guide

April 2013

Comments? [email protected]

Содержание 3050-VM



















































































































































































































































































Отзывы:

Нет отзывов