Avaya 3050-VM Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 274

Avaya 3050-VM Скачать руководство пользователя страница 71

Enter filename on server:

<filename.pkg>

FTP User (anonymous):

<username or press ENTER for anonymous mode>

Password:

<password or press ENTER for default password in

anonymous mode>

Received 28200364 bytes in 4.0 seconds

Unpacking...

ok

>> Software Management#

Activating the Software Upgrade Package

The VPN Gateway can hold up to two software versions simultaneously. To view the current
software status, use the

/boot/software/cur

command. When a new version of the

software is downloaded to the VPN Gateway, the software package is decompressed
automatically and marked as unpacked. After you activate the unpacked software version
(which may cause the VPN Gateway to reboot), the software version is marked as permanent.
The software version previously marked as permanent will then be marked as old.

For minor and major releases, the software upgrade will take part synchronously among the
set of VPN Gateways in a cluster. If one or more VPN Gateways are not operational when the
software is upgraded, they will automatically pick up the new version when they are started.

Note:

If more than one software upgrade has been performed to a cluster while a VPN Gateway
has been out of operation, the VPN Gateway must be reinstalled with the software version
currently in use in that cluster. For more information about how to perform a reinstall, see

Reinstalling the Software

on page 66.

When you have downloaded the software upgrade package, you can inspect its status with
the

/boot/software/cur

command.

1. At the

Software Management#

prompt, enter the following command:

>> Software Management#

cur

Version Name Status

------- ---- ------

9.0.0 SSL unpacked

5.1.5 SSL permanent

Performing Minor/Major Release Upgrades

User Guide

April 2013 71

«
...
69
70
71
72
73
...
»

Содержание 3050-VM



















































































































































































































































































Отзывы:

Нет отзывов