Avaya 3050-VM, Руководство пользователя, Страница: 143 / 274

(new setup, continued)
Initializing system......ok
Setup successful. Relogin to configure.
login:
7. Add an additional ASA 310-FIPS to the newly created cluster by following the
instructions on page Adding an ASA 310-FIPS to an Existing Cluster on page 61 up
to and including step 4 on page 142.
8. Transfer the cluster wrap key from the CODE-SO and CODE-USER iKeys to card
0.
When asked to insert the CODE-SO and the CODE-USER iKeys, make sure to use
the same CODE iKeys as you did in step 3 on page 142 and step 4 on page 142.
(join setup, continued)
Verify that CODE-SO iKey (black) is inserted in card 0 (with
flashing LED).
Hit enter when done.
Verify that HSM-USER iKey (blue) is inserted in card 0 (with
flashing LED).
Hit enter when done.
Verify that CODE-USER iKey (black) is inserted in card 0 (with
flashing LED).
Hit enter when done.
Wrap key successfully combined to card 0.
9. Transfer the cluster wrap key to card 1.
(join setup, continued)
Verify that CODE-SO iKey (black) is inserted in card 1 (with
flashing LED).
Hit enter when done.
Verify that HSM-USER iKey (blue) is inserted in card 1 (with
flashing LED).
Hit enter when done.
Verify that CODE-USER iKey (black) is inserted in card 1 (with
flashing LED).
Hit enter when done.
Wrap key successfully split combined to card 1.
10. If you selected FIPS mode as the security mode, specify the secret passphrase.
Enter the same secret passphrase as you specified in step 5 on page 142. This step
only appears if you selected FIPS mode when initializing the HSM cards.
(join setup, continued)
Enter the secret passphrase (as given during initialization of
the first iSD in the cluster): <Enter the same secret passphrase
as was used in the former cluster.>
An ASA 310-FIPS Cluster Must be Reconstructed onto New Devices
User Guide April 2013 143