Avaya 3050-VM Скачать руководство пользователя страница 48

Страница: 48 / 274

User password:

password

Creating group 'trusted' with secure access.

Creating user 'john' in group 'trusted'.

Creating empty portal linkset 'base-links' for group trusted.

• VPN Portal IP address. Used by remote users to connect to the VPN.

• DNS search list. Enables use of short names on the Portal, for example,

inside

to connect the server inside.example.com.

• HTTP to HTTPS redirection. Automatically redirects requests made with HTTP

to the proper HTTPS server configured for the VPN, for example, http://
vpn.example.com gets redirected to https://vpn.example.com.

To view all settings created by the VPN quick setup wizard, see

Settings Created

by the VPN Quick Setup Wizard

on page 49.

4. To configure IPsec access in your VPN, run the IPsec quick setup wizard.

With IPsec access enabled, remote users can access the VPN through a secure
IPsec tunnel using the Avaya VPN client (formerly Contivity).

Setup IPsec [no]:

yes

Creating default IKE profile under ipsec/ikeprof 1

Creating default user tunnel profile under ipsec/utunprof 1

Configuring IPsec Group login under aaa/group trusted/ipsec
Do you want to use IPsec Group login [no]:

yes

Enter IPsec secret:

secret

Enter Lower IP address in pool range:

10.10.10.1

Enter Upper IP address in pool range:

10.10.20.99

Enter Network mask for the pool range: [255.255.255.0]:

Creating IP pool 1

• IPsec group login and secret. Enables IPsec access for the trusted group, if

this group was created with the VPN quick setup wizard (see

step 3

page 47).

• Lower/upper IP address in pool range. Lets you specify an IP address range

for use in the unencrypted connection between the VPN Gateway and the
destination host.

• Network mask for IP pool range. Lets you enter a custom network mask if the

default network mask does not cover the pool range.

Initial Setup

48 User Guide

April 2013

Comments? [email protected]

Содержание 3050-VM



















































































































































































































































































Результаты поиска

Содержание 3050-VM

Отзывы:

Avaya 3050-VM, Руководство пользователя, Страница: 48 / 274

Результаты поиска

Содержание 3050-VM

Отзывы: