AVANT Robot 185, Руководство оператора

Страница: 8 / 76

8
Robot 185 Safety Instructions
Before operation
Check that there is no transportation damage to the machine.
Check that the control and supply cables are intact.
Check the oil level of the container.
Check that the operator’s console is undamaged.
No one is allowed to be closer than 6 metres of the machine, when it is
started up (see figure right).
Before operation, the outriggers must be lowered so that the machine is
standing steadily.
During operation
No one is allowed to be in the working area of the machine, when the machine is being
used. As the user of the machine, you are responsible for supervising that no one enters
the danger zone.
When the controls are on, always concentrate fully on the machine. When you enter the
machine’s working area, always turn off the control.
Always control the machine from a place, which is not affected by the demolition
operation.
Always stand on a surface that is above the machine, when the machine is being used on
an inclined surface. The machine may slide on the surface.
Never stand at a place where you might get compressed between the boom and the
machine frame or between the machine and a wall, bar, pillar, etc. Note that the position
of the machine may change rapidly, due to unexpected forces directed at the boom.
Never go under a boom that has been lifted. Always recognise that the machine might fall
down when you are working with the boom elevated.
Always work with lowered outriggers.
Always keep control and supply cables away from the working area.
Never stand on the control or supply cable.
Ensure that the control or supply cables are not run over, when moving the machine.
If there is a danger that the machine might fall down, control the machine by radio control.