50
Robot 185
Service
Track system
General
• Track tensioning is automatic and is activated every time the machine is raised on outriggers. The
hydraulic system includes a 150 bar pressure accumulator that is used for the automatic tensioning.
• The tracks are loosened by unscrewing the pressure accumulator adjustment wheel open from the
outrigger block. This can be found from left rear protection cover.
• The tracks do not require maintenance during normal usage. The tracks must be replaced when the
rubber coating has worn out.
Front wheel
Installation:
• Unscrew the pressure accumulator adjustment wheel open from the outrigger block. This can be found
from left rear protection cover.
• Lift up the front wheel, part number 3., and push it to its locking position.
• Before the front wheel can be removed, the tracks need to be removed first.
Instructions for operation and service:
• Check that the sliding surfaces are intact.
• Check the fastening of the lower sliding bar and possible cracks in the shaft of the front wheel.
• Check that the front wheel slides forwards and backwards.
• The front wheels are pre-lubricated and they do not need any maintenance in normal usage.
Содержание Robot 185
