Autodesk LIGHTSCAPE, Руководство пользователя

Страница: 58 / 362

The Interface 4
50
Lightscape
At lower settings, the texture is scaled down and is
displayed as an accurate representation of the
texture, with less detail. Reducing the size of the
texture can significantly improve display speed.
To set the display interactivity properties:
1.
Choose File | Properties.
The Document Properties dialog appears.
2.
Click the Display Interactivity tab.
The Display Interactivity panel appears.
3.
Enable an Interactive Speed mode.
4.
Choose either the Draw Every Nth Face or Level
of Detail option, and specify a value by using the cor-
responding slider or by entering a value directly in
the appropriate box.
Note:
You can set the Level of Detail option in the
Solution stage only.
5.
To choose a scaling factor for displayed textures,
select an option from the Max. Display Texture Size
list.
6.
Click OK.
Setting System Options
The system options are the general parameters and
defaults stored with your Lightscape application.
You can modify preview, drag and drop, and envi-
ronment options. The following sections describe
the system options in detail.
Setting Preview Control Options
Use the Preview Control options to customize the
material, block, and luminaire previews.
Background Image
Use this option to specify the background image in
the material preview.
Reflected Image
Use this option to specify the reflected image in the
material preview.
Defaults
Use this option to restore the background and reflec-
tion images to the default settings.
Display Loaded Textures
Use this option to view assigned textures in the block
and luminaire previews.
64 x 64 Display textures at 64 x 64 pixels
per inch.
32 x 32 Display textures at 32 x 32 pixels
per inch.
Select: To: