Autodesk LIGHTSCAPE, Руководство пользователя

Страница: 187 / 362

Setting the Surface Processing Parameters
179
❚❘❘
The wizard dialog appears.
3.
Choose a level of quality on the Quality page,
then click Next.
4. On the Daylight page, choose whether to consid-
er daylight in your solution.
5.
If you chose No, click Next.
6.
If you chose Yes, select the statement that de-
scribes your model, then click Next.
7. On the Finish Wizard page, click Finish.
The meshing parameters for the model are set
automatically.
8. Click OK.
Setting the Surface Processing
Parameters
The surface processing parameters affect the
processing of a surface or group of surfaces. Use
these parameters to fine-tune the radiosity process,
maximizing quality while minimizing computation
time and storage requirements.
▲
If you change any of these parameters after
processing has begun, they are considered only for
the iterations run after the change. To affect the
complete radiosity solution, you must reset the
solution and start again.
To set the surface processing parameters:
1.
On your model, select the surface (or surfaces)
whose processing parameters you want to set.
2.
Right-click and choose Surface Processing.
The Surface Processing dialog appears.
3.
Enable the surface processing options, as re-
quired.
4.
To adjust the Mesh Resolution parameter, enter a
value in the box, adjust the slider, or click the Mesh
Resolution increments buttons.
Enable: To:
Occluding Block light and cast a shadow with
the surface.
Receiving Receive light on the surface.
Reflecting Reflect light back into the environ-
ment from the surface.
Window Define a window with the surface.
Opening Define an opening with the sur-
face.
Display Raw
Textures Prevent the calculation of lighting
effects on the surface’s texture.
No Mesh Prevent mesh subdivision on the
surface.