Autodesk LIGHTSCAPE, Руководство пользователя

Страница: 298 / 362

LSnet C
290
Lightscape
Job Queue Path
Use this option to specify the directory to which you
send jobs (for addition to the LSnet job list) using the
JobQ Sender.
PVR Save Path
Use this option to specify the location of your DPS
Perception drive, if applicable. Animation frames are
copied to this device after the job finishes rendering
only if the Save to PVR option on the Job Setup panel
is enabled. For more information, see “LSRAY and
LSRENDER Options” on page 292.
Output Render Log To File
Use this option to save log information to a text file in
addition to displaying the information in the Render
Log panel. If this option is disabled, LSnet will not
update the log file.
Use Job Queue
Use this option to enable the JobQ application. If this
option is enabled, you can use the JobQ Sender appli-
cation to submit jobs to LSnet for rendering.
Make Jump Starter Spy
Use this option to display the Spy panel in the Jump
Starter application. The Spy panel displays LSnet
status information from any computer on the
network (not just the LSnet server).
High Network Priority
Use this option to increase the priority of LSnet
rendering on a node. This option does not affect
rendering performance.
CPU Timeout
Use this option to specify how much time (in
seconds) LSnet will search for nodes on your
network. The default is 30, but you can set any value
between 10 and 2048.
Loading Timeout
Use this option to specify how much time (in
seconds) LSnet will attempt to load jobs.
Hard Drive Low
Use this option to set the minimum number of free
megabytes required for your hard drive. If this value is
reached or exceeded (there is less space remaining
than the value specified), LSnet will abort rending
and save a “panic.prj” file.
For more information, see the Online Help files.
Enable PVR Save
Use this option to copy animation frames to a DPS
Perception drive.
Job Setup Panel
Use the Job Setup Panel to set the options for your
LSnet jobs. You can access this panel by choosing
Job | Edit or by clicking the Options button
.
The options available on the Job Setup panel vary
depending on the Job Type option you have selected.
If you choose to render an lsrad job, see “LSRAD
Options” on page 291 for more information. If you
choose to render an lsray or lsrender job, see “LSRAY
and LSRENDER Options” on page 292 for more
information.
Job Type
Use this list to choose the type of rendering job to
perform. You can choose either lsrad, lsray, or
lsrender.