manualshive.com logo in svg

Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010, Руководство пользователя

Поделиться
Скачать
Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010 Скачать руководство пользователя страница 161

NOTE

When you start the Zoom tool from the Full Navigation wheel, incremental zooming must be enabled in the

Options Editor in order to use CTRL+click and SHIFT+click.

Zoom Constraints

When changing the magnification of a model with the Zoom tool, you cannot zoom in any further than the
focus point or out past the extents of the model. The direction you can zoom in and out is controlled by the
center point set by the Center tool.

NOTE

Unlike the Zoom tool on the big View Object wheel, the Zoom tool on the mini View Object wheel and the

Full Navigation wheels are not constrained.

To zoom the view with a single click

NOTE

You must enable incremental zoom when using the Full Navigation wheels, or a mini View Object wheel. For

the big View Object wheel, the incremental zoom is always enabled.

1

Do the following to make sure the Enable Single-Click Incremental Zoom In option is selected:

a

Display the Full Navigation Wheel.

b

Right-click the wheel, and click SteeringWheel Options.

c

In the Options Editor, the SteeringWheels page under the Interface node, select the Enable Single-Click
Incremental Zoom In check box.

d

Click OK.

2

Display a wheel that has the Zoom tool.

3

Click the Zoom wedge.

The magnification of the model is increased and you are zoomed in closer to the model. If you hold down
the SHIFT key while clicking the Zoom wedge, the model is zoomed out; you can hold down the 

CTRL

 key

to zoom in.

To zoom a view in and out by dragging

1

Display one of the Full Navigation wheels, or one of the View Object wheels.

2

Click and hold down the Zoom wedge.

The cursor changes to the Zoom cursor.

3

Drag vertically to zoom in or out.

4

Release the button on your pointing device to return to the wheel.

To zoom in to an area of the model by specifying window

1

Display one of the Full Navigation wheels or the mini View Object wheel.

2

Press and hold down the 

SHIFT

 key.

3

Click and hold down the Zoom wedge.

The cursor changes to the Zoom cursor.

SteeringWheels | 149

Содержание 507B1-90A211-1301 - NavisWorks Manage 2010

























































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды