Atten ATM3500A, Руководство пользователя

Страница: 178 / 203

5.
Not Used
32 Set to 0
6.
Not Used
64 Set to 0
7.
Not Used
128 Set to 0
8.
Not Used
256 Set to 0
9.
Ohms Overload
512 Range overload on 2-/4-wired ohm function.
10.
Not Used
1024 Set to 0
11.
Limit Failed at LO
2048 Reading is less than lower limit under limit test.
12.
Limit Failed at HI
4096 Reading is excess upper limit under limit test.
13.
Not Used
8192 Set to 0
14.
Not Used
16384 Set to 0
15.
Not Used
32768 Set to 0
The following conditions will clear the questionable data event register.

You execute a *CLS command.

You query the event register by using STATus:QUEStionable:EVENt?.
The following conditions will clear the questionable data enable
register.

You turn on the power without using *PSC command.

You execute the STATus:PRESet command.

You execute the STATus:QUEStionable:ENABle 0 command.
C.10 Status Reporting Commands
SYSTem:ERRor?
Query the multimeter’s error queue. Up to 20 errors can be stored in the
queue. Errors are retrieved in first-in-first out (FIFO) order. Each error
string may contain up to 80 characters.
STATus:QUEStionable:ENABle <enable value>
178