ashtech HDS800, Справочное руководство

Страница: 641 / 678

625
Troubleshooting
$PASHQ,VERSION
$PASHQ,OPTION
$PASHQ,PAR
Log these responses in Terminal mode (with Hyperterminal
for example) at a speed of 19600 Bd in a text file (*.txt).
List of Alarms
Alarms are reported on the receiver display screen. A blinking
warning sign appears on the status screen prompting you to
press the Scroll button so you can read the alarm label.
To acknowledge an alarm message once the alarm label is
displayed on the screen, press the Scroll button again. If
several alarm messages are reported, press the Scroll button
as many times. This will acknowledge each message, one
after the other.
If the reason for raising an alarm persists, you won’t be able
to acknowledge the alarm until you correct the problem.
Some of the alarms listed below can only be the result of a
bad serial command submitted to the receiver (in command
mode). Serial commands can be applied to the receiver from
FAST Survey or GNSS Solutions’ Wincomm Utility.
# Rank Alarm Label Symptoms & Remedies
0 Medium Software error
Receiver detected an internal error due to software. If persisting, 2nd-
level maintenance is required for the receiver.
1 Medium Unknown command
Unknown serial command received. Correct syntax and re-send com-
mand.
2 Medium Bad parameter
Not well-formatted parameter in the command sent. Correct syntax
and re-send command.
3 Medium Bad command checksum
Serial command received with bad checksum. Correct checksum and
re-send command.
4 Medium File open error
Receiver failed to open the raw data file. Restart the receiver an try
again.
If error persists and selected storage medium is USB, change USB key
and try again.
If error persists and selected storage medium is internal memory, re-
format internal memory using command $PASHS,INI,2 (configuration
will be lost).
5 Medium File close error
Receiver failed to close the raw data file. Try again. If still unsuccess-
ful, turn off the receiver and try again.