ashtech HDS800, Справочное руководство

Страница: 287 / 678

271
Set Command Library
$PASHS,BEEP,OFF*04
Relevant Query
Command
$PASHQ,BEEP
BRD: Enabling/Disabling the RTC Bridge Function
Function
This command is used to control the RTC Bridge function. Its
use is required only in the receiver in charge of forwarding its
RTK corrections to other nearby rovers through its internal
radio transmitter (an external transmitter can also be used, if
any).
Command Format
Syntax
$PASHS,BRD,s1[,d2,c3,c4][*cc]
Parameters
Examples
Enabling RTC Bridge in the receiver by forwarding RTK
corrections from the modem to its port D (internal radio
transmitter):
$PASHS,BRD,ON,0,E,D*11
Disabling RTC Bridge by preventing RTK corrections from
being forwarded to the output port:
Parameter Description Range Default
s1
Controls the availability of RTK corrections
on the specified output port:
• OFF: No RTK corrections forwarded to
the output port.
• ON: RTK corrections forwarded to the
output port.
ON, OFF OFF
d2
Enables or disables the use of RTK correc-
tions in the receiver’s position computa-
tion.
• 0: RTK corrections used
• 1: RTK corrections not used
0, 1 0
c3
Input port ID (port from which RTK correc-
tions are available in the receiver).
E (modem)
P (Ethernet)
Q (Ethernet)
E
c4
Output port ID (port D for internal transmit-
ter, or A, B or F for external radio transmit-
ter.
A, B, F, D A
*cc Optional checksum *00-*FF