ashtech HDS800, Справочное руководство

Страница: 260 / 678

244
Using Serial Commands
$PASHQ,ANP,RCV
Antenna Name & Offsets of
Received Base
$PASHS,ANP,OUT Defining the virtual antenna $PASHQ,ANP,OUT Virtual antenna
$PASHS,ANR Antenna reduction mode $PASHQ,ANR Antenna reduction mode
$PASHS,ANT Antenna height $PASHQ,ANT Antenna height
$PASHS,ATL Debug data recording $PASHQ,ATL Debug data recording
$PASHS,BAS Differential data type $PASHQ,BAS DIfferential data type
$PASHS,BDS Differential data streams $PASHQ,BDS Differential data streams
$PASHS,BEEP Beeper $PASHQ,BEEP Beeper
$PASHS,BRD RTC Bridge $PASHQ,BRD RTC Bridge
$PASHQ,BTH Bluetooth settings
$PASHS,BTH,NAME Bluetooth device name
$PASHS,BTH,PIN Bluetooth device pin code
$PASHS,CFG GNSS tracking configuration $PASHQ,CFG GNSS tracking configuration
$PASHS,CMD,LOD Running a command file
$PASHS,CMD,WTI Inserting wait time
$PASHS,CP2,AFP Ambiguity for 2nd RTK engine $PASHQ,CP2,AFP Ambiguity for 2nd RTK engine
$PASHS,CP2,RST Reset second RTK process
$PASHS,CPD,AFP Ambiguity fixing parameter $PASHQ,CPD,AFP Ambiguity fixing parameter
$PASHQ,CPD,ANT Base antenna height
$PASHS,CPD,ARR,LEN Heading mode, baseline length
$PASHS,CPD,ARR,MOD Heading mode
$PASHS,CPD,ARR,OFS Heading and elevation offsets
$PASHS,CPD,ARR,PAR Heading mode, limits of values
$PASHS,CPD,FST
RTK output mode $PASHQ,CPD,FST RTK output mode
$PASHS,CPD,MOD Base/rover mode $PASHQ,CPD,MOD Base/rover mode
$PASHS,CPD,NET Network corrections $PASHQ,CPD,NET Network operation mode
$PASHQ,CPD,POS Base position
$PASHS,CPD,REM Differential data port $PASHQ,CPD,REM Differential data port
$PASHS,CPD,RST RTK process reset
$PASHS,CPD,VRS VRS assumption mode $PASHQ,CPD,VRS VRS assumption mode
$PASHS,CST,MTP,ADD Adding mount points
$PASHS,CST,MTP,DEL Deleting mount points
$PASHS,CST,OFF
Turning off NTRIP caster
$PASHS,CST,ON Turning on NTRIP caster
$PASHS,CST,PAR Setting NTRIP caster $PASHQ,CST NTRIP caster parameters
$PASHS,CST,RST NTRIP caster parameters
$PASHS,CST,USR,ADD Adding NTRIP caster users
$PASHS,CST,USR,DEL Deleting NTRIP caster users
$PASHS,CTS
Handshaking $PASHQ,CTS Handshaking
$PASHS,DDN,PAR Setting DynDNS service $PASHQ,DDN DynDNS parameters
$PASHS,DDN,SET Sending IP address to DynDNS
$PASHS,DIP Server connection $PASHQ,DIP Direct IP parameters
Table 1- Receiver Configuration Commands (Continued)
Set Command Description Query Command Description