ashtech HDS800, Справочное руководство

Страница: 143 / 678

127
Web Server Help Files Collection
Configuration Tab
NTRIP Server via port E (Modem) or port P (Ethernet)
Embedded NTRIP Caster via port P (Ethernet)
Password
(Optional, depending on the remote server used)
Password required to connect to the remote server.
If a login and password are needed for the connection
to the server, then the receiver will send the $GPUID
command to the server after you have entered these
two parameters and clicked on the Configure button.
DIP,PAR
Parameter Designation $PASHS
Connect
Now
Check this button to let the receiver perform the
requested network connection after you have clicked
on the Configure button.
-
Address IP address of the NTRIP caster NTR,PAR
Port IP port number of the NTRIP caster NTR,PAR
Mount Point Mount point used to connect to the NTRIP caster NTR,MTP
Password Password required to send data to the NTRIP caster NTR,PAR
Parameter Designation $PASHS
Connect
Now
Check this button to let the receiver perform the
requested network connection after you have clicked
on the Configure button.
-
Address
A read-only field reading ”localhost”, invoking the IP
address of the receiver itself.
-
Port
A read-only field indicating the IP port of the NTRIP
caster, as defined on the NTRIP caster settings page.
-
Mount Point
Choose one of the mount points declared in the
embedded NTRIP caster through which the data will
be made available to caster users.
NTR,MTP
Password
A read-only field indicating the password of the NTRIP
caster, as defined on the NTRIP caster settings page.
Parameter Designation $PASHS