ashtech HDS800, Справочное руководство

Страница: 186 / 678

170
Web Server Help Files Collection
Configuration Tab
Follow the instructions below to define the output of
messages, whether in ATOM or Ashtech Legacy format:
• Select the message type from the
Message
drop-down list,
the output port from the
Output
drop-down list, then enter
its output rate, in seconds, in the
Rate
field, and click on
the
Add
button. The new message definition will then
appear as a new row in the table on the right.
Before you select a message type from the drop-down list,
you can hold the mouse cursor over this message name in
the drop-down list. After about one second, a tip box will
appear providing the full definition of this message.
• To change the settings of an existing message (port, rate),
select the corresponding row in the table. This populates
the three fields on the left with the settings of that
message. Edit the port and/or rate and then click on the
Modify
button. The table row is updated accordingly. All
the messages you add or modify on this page will be
definitively saved in the receiver after you click on the
Configure
button located at the bottom of the page.