ashtech HDS800, Справочное руководство

Страница: 80 / 678

64
Using the Web Server
– To define the output of an NMEA message on a given
port, you just need to select the message type from the
Message
drop-down list, the output port from the
Output
drop-down list, then enter its output rate, in seconds,
in the
Rate
field, and finally click on the
Add
button.
The new message definition will then appear as a new
row in the table on the right. Note that for messages
PTT, TTT and XDR, you don’t have to define an output
rate, due to the very nature of these messages.
– To change the definition of an existing message (port,
rate), select the corresponding row in the table. This
populates the three fields on the left with the
definition of that message. Edit the port and/or rate
and then click on the
Modify
button to save your
changes.The table row is updated accordingly.
Note that depending on the current selection on this
page, the button located underneath the three fields
on the left may be either grayed or with a different
label (
Add
or
Modify
).
– Deleting a message definition can be done by simply
clicking on the corresponding “trash” sign in the
Clear
column on the far right. This deletes the table row.
– There is also a
Clear All
button underneath the table
that allows you to delete all the message definitions
from the table in one click.
GST GNSS pseudo-range error statistics
GSV GNSS satellites in view
HDT Computed true heading (not supported)
LTN Latency
POS Computed position data
PTT PPS signal time tag
RMC Recommended minimum specific GNSS data
RRE Residual error
SAT Satellites status
SGA GALILEO satellites status
SGL GLONASS satellites status
SGP GPS & SBAS satellites status
TTT GPS time of external event
VEC Vector & accuracy data
VTG Course over ground and ground speed
XDR Transducer measurements
ZDA UTC Time & date
Message Name Description