ashtech HDS800, Справочное руководство

Страница: 101 / 678

85
Using the Web Server
address of your HDS800: This is the public IP address of
the HDS800, and not necessarily the one displayed on the
HDS800 screen (see your IT manager for more
information). If the receiver is connected to a local
network (LAN), then a direct link must exist between the
declared public IP address and the receiver’s personal IP
address within the LAN.
• Choose the services you want to use (typically “VPN”,
“remote desktop” and “web server”).
• Click Add to Cart .
• Click on “Proceed to checkout”.
• Click on “Activate Services”.
You can now activate the update mechanism through the Web
Server. On the Web Server’s Configuration tab, select
Connections
then
Ethernet
. In the
DynDNS
frame, do the
following:
• Check on the
Activation
button
• Keep the default address shown in the
System
field
• Enter the
Hostname
of your receiver, as declared when you
opened your DynDNS account.
• Enter the credentials (
Username
,
Password
) you specified
when creating your DynDNS account. These will authorize
the receiver to access and use the DynDNS service.
• Specify the rate (
Period
), in seconds, at which the receiver
should regularly access the DynDNS service to provide its
current IP address. Through these regular connections,
the receiver will allow the DynDNS service to update the
association made between the declared hostname for the
receiver and its currently valid IP address.
The
Update Now
button can be used at this stage to force
the receiver to send right away its IP address to the
DynDNS service.
• Click on the
Configure
button to let the Web Server load all
your new parameters to the receiver.
Configuration Memo
Entering the settings of a base/rover system is quite
straightforward when a radio is used to transmit corrections
from the base to the rover.
When an IP connection is used, understanding the possible
base/rover associations is not so clear because in addition,