ashtech HDS800, Справочное руководство

Страница: 645 / 678

629
Troubleshooting
79 Medium Ethernet DIP connected
Source table requested whereas GSM already used in DIP mode. End
DIP connection before requesting the source table.
80 Medium Ethernet NTRIP connected
Source table requested whereas GSM already used in NTRIP mode.
End NTRIP connection before requesting the source table.
90 Medium BTH Name Rejected Bluetooth name rejected. Try another one.
91 Medium BTH PIN Rejected Bluetooth pin rejected. Try another one.
93 Medium
GPRS Ini Failed No Signal
Detected
Modem initialization failed resulting in no input signal detected
94 Medium No ATOM Session File Receiver could not find any G-file collected through session
95 High Rinex Convers. Failed Receiver could not convert G-file into Rinex files
96 High Hatanaka Convers. Failed Receiver could not convert G-file into Hatanaka Rinex files
97 High TarZ Compres. Failed Receiver could not compress converted files
99 High Session Start Failed Receiver could not start programmed session
100 High Session Stop Failed Receiver could not terminate session in progress
101 Medium E-Mail failed
Receiver could not send a notification email following the occurrence
of a high-level alarm
102 High Conversion not allowed Receiver was not allowed to convert the G-file
103 Medium DynDNS Config Error
DynDNS parameters are incorrect. Please review each of them and
correct whenever necessary.
104 High
DynDNS Stopped by
server (Abuse)
105 High DynDNS Connection error
The receiver fails to connect to the DynDNS service. Please check
your DynDNS parameters and the EThernet connection.
106 High
Carrier Lost on Ethernet
Connection The carrier on the Ethernet line being lost, the Ethernet port is auto-
matically re-started. Please check the Ethernet connection.
107 Medium
Data read error on ETH
network
108 High Option K has expired
The use of the [K] firmware option was granted to you for a limited
period of time, which has now expired. Please contact Ashtech to
renew the use of this option.
109 High Option F has expired
The use of the [F] firmware option was granted to you for a limited
period of time, which has now expired. Please contact Ashtech to
renew the use of this option.
110 High Option Z has expired
The use of the [Z] firmware option was granted to you for a limited
period of time, which has now expired. Please contact Ashtech to
renew the use of this option.
111 High Option S has expired
The use of the [S] firmware option was granted to you for a limited
period of time, which has now expired. Please contact Ashtech to
renew the use of this option.
112 High Option P has expired
The use of the [P] firmware option was granted to you for a limited
period of time, which has now expired. Please contact Ashtech to
renew the use of this option.
113 High Option G has expired
The use of the [G] firmware option was granted to you for a limited
period of time, which has now expired. Please contact Ashtech to
renew the use of this option.
# Rank Alarm Label Symptoms & Remedies