ashtech HDS800, Справочное руководство

Страница: 261 / 678

245
Using Serial Commands
$PASHS,DIP,OFF
Terminating Direct IP connec-
tion
$PASHS,DIP,ON Disabling Direct IP connection
$PASHS,DIP,PAR Setting Direct IP parameters
$PASHS,DRD Data Recording Duration $PASHQ,DRD Data Recording Duration
$PASHS,DRI Raw data recording rate $PASHQ,DRI Raw data recording rate
$PASHS,DST
Connection modes for data
streams
$PASHQ,DST
Connection modes for data
streams
$PASHQ,DST,STS Data stream port status
$PASHS,DSY Daisy chain $PASHQ,DSY Daisy chain
$PASHS,DYN Receiver dynamics $PASHQ,DYN Receiver dynamics
$PASHS,ECP,OFF
$PASHS,ECP,ON Controlling power for extended
communication port
$PASHQ,ECP
Extended communication port
power status
$PASHQ,EFT Embedded FTP server
$PASHS,EFT,ON Starting embedded FTP server
$PASHS,EFT,OFF Stopping embedded FTP server
$PASHS,EFT,PAR Setting embedded FTP server
$PASHS,EFT,USR,ADD Adding embed. FTP server user
$PASHS,EFT,USR,DEL Deleting emb. FTP server user
$PASHS,ELM
Elevation mask $PASHQ,ELM Elevation mask
$PASHQ,EML Email settings
$PASHS,EML,PAR Email parameters
$PASHS,EML,TST Testing email
$PASHS,ETH,OFF
$PASHS,ETH,ON Controlling Ethernet port power
supply
$PASHQ,ETH Ethernet status and parameters
$PASHS,ETH,PAR Ethernet parameters $PASHQ,ETH Ethernet status and parameters
$PASHS,EXM,OFF Disabling extended int. memory
$PASHS,EXM,ON Enabling extended int. memory
$PASHQ,EXM Extended internal memory status
$PASHQ,FIL,CUR Info on G-file being recorded
$PASHS,FIL,D Deleting files
$PASHS,FIL,DEL Deleting files & directories
$PASHQ,FIL,LST Listing files in memory or USB key
$PASHQ,FLS List of raw data files
$PASHQ,FTP FTP status and settings
$PASHS,FTP,OFF Ending FTP file transfer
$PASHS,FTP,PAR Setting FTP for file transfer
$PASHS,FTP,PUT Sending files to FTP server
$PASHS,GAL GALILEO tracking $PASHQ,GAL GALILEO tracking
$PASHS,GLO GLONASS tracking $PASHQ,GLO GLONASS tracking
$PASHS,GPS GPS tracking $PASHQ,GPS GPS tracking
$PASHS,HDB,OFF Power Off 2nd GNSS Board
$PASHS,HDB,ON Power On 2nd GNSS Board
$PASHQ,HDB Power Status of 2nd GNSS Board
Table 1- Receiver Configuration Commands (Continued)
Set Command Description Query Command Description