ashtech HDS800, Справочное руководство

Страница: 152 / 678

136
Web Server Help Files Collection
Configuration Tab
Setting a Base to
Generate Data Streams
on its Ethernet Port
This page is an abridged version of the Base Setup-Full Setup
page only showing the settings required to configure a base
for generating data streams on its Ethernet port (ports I1 to
I9).
These groups of parameters are detailed below.
Connect
Now
Check this button to let the receiver perform the
requested network connection after you have clicked
on the Configure button.
Address,
Port, Mount
Point, Pass-
word
Enter the network information relevant to the NTRIP
caster to which the base is expected to deliver its
data.
When the base delivers its data to the embedded
NTRIP caster, there is no password or IP address
needed. You only have to choose the mount point
through which the data from the base will be made
available to users through the NTRIP caster.
Message
Choose the type of message generated by the base.
Then place the mouse cursor over the ”I” sign (to the
right of the Message drop-down list) to read the
details of the currently set messages.
-
Parameter Designation $PASHS