ashtech HDS800, Справочное руководство

Страница: 150 / 678

134
Web Server Help Files Collection
Configuration Tab
Satellites
Use this area to define the constellations tracked by the base
as well as the elevation mask applied to all constellations.
See the description of each parameter in the table below.
NTRIP Server 1
Use this area to declare the type of connection used by the
base to deliver its data to an NTRIP caster via a mobile
communication network (port E) or directly through the
Virtual Antenna
This parameter allows you to define a virtual
antenna:
• Select “Off” if you do not want to define one
• If you want one, select the virtual antenna
name for which you would like the receiver to
deliver raw data, i.e. as if the raw data had
been collected using this antenna.
This antenna name can only be chosen from a
list of antenna names stored in the receiver.
This antenna name can only be chosen from a
list of antenna names stored in the receiver.
NULLANTENNA, ADVNULLANTENNA, etc.
are the most commonly used virtual antennas.
ANP,OUT
Parameter Designation $PASHS
Recording and
Output Eleva-
tion Mask
Enter the elevation mask, in degrees, used by the
receiver to determine which raw/differential data from
each visible satellite should be recorded or output,
depending on the elevation of the satellite. No data
from any visible satellite located below this elevation
angle will be recorded or output.
ELM
GLONASS
Check this button to enable GLONASS tracking
(requires installed S option). Clear it otherwise.
GLO
SBAS
Check this button to enable SBAS tracking.Clear it
otherwise.
SBA
Parameter Designation $PASHS
ARP
SHMP Offset
Antenna radius
SHMP