Arkray SPOTCHEM EZ SP-4430, Руководство по эксплуатации

Страница: 62 / 139

C 2-36 ● SP-4430
1-4
装置の設置
Chapter 2 MEASUREMENT
2-5-3 キャリブレータ校正
Press [STOP] key to stop the
calibration, the Calibration
standby screen is restored.
▲
Start measurement of the “Low” calibrator. 8.
●
●
●
●
●
●
M e a s u r i n g・・・
S t o p（ S T O P ）
M e a s u r i n g・・・ ０１：２３
S t o p（ S T O P ）
S t a n d b y TーP r o
L＝２ H ＝０ N＝２
Press [START] key. The Reagent Table
and Centrifuge equipped Multi Rack
move inside, and the Table Cover
closes. “Measuring…” is displayed.
Approximate remaining time is
displayed. The time displayed in [ ],
changes at every 30 seconds.
As the measurement proceeds, the
display of approximate remaining
time changes to the ordinary time
indication. The [ ] disappears and
the time is counted down by one
second.
When “Low” calibration is completed,
the Table Cover opens, and the
Reagent Table and Centrifuge-
equipped Multi Rack move forward.
The Calibration standby screen is
displayed.
When the number of calibration is
more than 3, repeat the procedure
from 5 to 8.
The Calibration standby screen
displays the name of the Reagent Strip
being calibrated, the measured
number of Low and High (L, H) and the
calibration times (N).
The cursor blinks at L or H according
the calibrator (Low or High) to be
calibrated next. The examples of the
screen at the right shows the number
of times of calibration is 2, Low has
already measured twice and High will
be measured next.
M e a s u r i n g・・・ ［３：００］
S t o p（ S T O P ）