manualshive.com logo in svg

Arkray SPOTCHEM EZ SP-4430, Руководство по эксплуатации, Страница: 3 / 139

Поделиться
Скачать
Arkray SPOTCHEM EZ SP-4430 Скачать руководство пользователя страница 3

b

SP-4430 ● 02

Introduction

The SP-4430 is an automated biochemical analyzer using a dry
chemistry system.

This manual contains outlines, instructions for the operation,
maintenance and troubleshooting for the SPOTCHEM SP-4430.
Before operating the SP-4430, read this manual carefully.
It is recommended to retain this manual for future use.

Always be careful when handling blood samples or waste reagent

strips.  Incorrect or imprecise procedures may result in exposure

to pathogenic microbes.

This analyzer must only be operated by those trained in proper

procedures for clinical testing and handling of hazardous waste.

Anyone who operates the analyzer for the first time must be

assisted by a trained person.

Never touch the Reagent Table, Centrifuge-equipped Multi Rack,

or other places where sample residue may collect with bare

hands.  When performing maintenance, always wear protective

gloves to prevent exposure to pathogenic microbes.

Separate used samples, tips and protective gloves from general

waste and discard them according to local regulation on

biohazardous waste.

●

●

●

●

WARNING

・

All rights reserved. Reproduction of this manual is forbidden.

・

The contents of this manual are subject to change without further notice.

・

Although we take all possible measures to ensure the contents of this manual, please notify your distributor 

・

when you have questions, or find errors or omission.

Содержание SPOTCHEM EZ SP-4430












































































































































Отзывы:

Нет отзывов