Arkray SPOTCHEM EZ SP-4430, Руководство по эксплуатации, Страница: 78 / 139

C SP-4430 ● 3-07
Chapter 3 SUB MENU
1-4
装置の設置
2-3-4 測定の準備
End transmission. 4.
Press [STOP] key three times to
return to the MAIN MENU.
●
Enter searching condition. 3.
Enter the dates of starting and
finishing measurements by sliding
the cursor using [hyphen (-)] key.
Press [ENTER] key. The ID entering
screen is displayed. Press [ENTER]
key when not searching by ID.
Enter an ID searching pattern for the
sample(s) to print by using numbers,
alphabets, and symbols up to 13
characters.
Wildcards can be used to enter.
Press [ENTER] key.
The selected measurement results
are transmitted.
When the transmission is completed,
the Measurement result selecting
screen is restored.
●
●
●
●
●
If designation of the range of
measurement dates (the dates
of starting and finishing
measurements) is unnecessary,
press [ENTER] key twice to
proceed to the next setting
screen.
Be sure to enter correct dates
to avoid inconsistencies.
The 2-digit number of the
“year” section of the date
indicates the last 2 digits of
year and is interpreted as
follows:
00~89 -> 2000~2089
90~99 -> 1990~1999
See 3-09 page for information
on wildcards.
▲▲
▲
If the selected measurement
result is not found in the data,
“No matching data” is
displayed as shown on the
right.
Press [ENTER] key to return to
the Measurement result
selecting screen.
▲
▲
D a t e ＜ ９ ９ー０１ー０１＞Y MD
t o ＜００ー１２ー３１＞
I D＜ ＊ ＞
S e n d i n g・・ （ ４／１５ ） ／
s t o p（ S T O P ）
１ . L a t e s t ２ . A L L
３ . S e a r c h （ １／１ ）
N o d a t a m a t c h e d .
O K（ E N T E R ）
１ . M e a s u r e ２ . S u b m e n u
３ . C a l i b r a t e
（ １／１ ）