Arkray SPOTCHEM EZ SP-4430, Руководство по эксплуатации, Страница: 55 / 139

e
I n s e r t a c a r d .
（ S T O P ）
SP-4430 ● 2-29
1-4
装置の設置
Chapter 2 MEASUREMENT
2-5-2 Calibration by magnetic card
Set the calibration condition. 2.
Press [3] key on the MAIN MENU.
The CALIBRATION MENU is
displayed.
●
By inserting “Reagent Card” attached to Single Reagent Strips or another
one attached to Multi Reagent Strips into a magnetic-card reader,
differences among lots and changes with time of reagent pack are
automatically calibrated.
“CARD” means calibration by
magnetic calibration card and
“Cal.” means calibration by
calibrator kit.
▲
Set the calibration type as by magnetic card. 1.
When changing the calibration type from calibration by calibrator kit (Cal.) to
calibration by magnetic card (CARD), change the setting “see 3-3-2 Enter
parameters”).
If the calibration type is already set as calibration by magnetic card, this operation
is not necessary.
●
１ . C A R D ２ . C a l .
３ . I n f o r m a t i o n （ １／１ ）
Press [STOP] key to stop the
calibration by magnetic card.
▲
Insert Reagent Card. 3.
Press [1] key on the CALIBRATION
MENU.
Insert either strip of a Single or Multi
Card in the magnetic reader and
slide the strip to the right.
●
●
There is no order for inserting
the stripes. Either stripe can be
inserted first.
▲
For the lot number of “Reagent Card” for magnetic calibration, use the same
lot number as that of the reagent strip currently in use (Magnetic cards
attached to the Reagent Strips in use). Calibration can not be performed with
magnetic cards with different lot number or magnetic cards with different
Reagent Strips.
IMPORTANT
Requirements Reagent Card
１ . M e a s u r e ２ . S u b m e n u
３ . C a l i b r a t e
（ １／１ ）