Arkray SPOTCHEM EZ SP-4430, Руководство по эксплуатации, Страница: 46 / 139

C
The number of the previous
measurement No + 1 is displayed
as the initial number.
To perform measurement with
the number, press [ENTER] key
to confirm. Once the power is
turned off, the initial number
returns to 1.
The last entered ID is displayed.
To perform measurement with
the same ID as shown on the
screen, press [ENTER] key. If
the MAIN MENU is restored, the
previous ID is cleared.
To enter ID, use the numeric
keys and [-/.] key.
Example: To enter “EZ”
[3] [3] [3] [9] [9] [9] [9] [9]
Example: To enter “SP”
[7] [7] [7] [7] [7] [-] [7] [7]
The following 12 signs can be
entered by using [0] key.
＊ ？ ＃ . , : ;
’
ー ＋ / ％
To delete the last character, press
[MENU] key and [-/.] key
simultaneously.To restore the
initially shown ID, press [START]
key.
When the barcode reader
(optional) is used, manual entering
is not necessary.Read barcode is
automatically allocated as ID.
When the barcode reader is
used a message “BARCODE
AVAILABLE” is displayed.
Press [hyphen (-)] key on the
Standby screen to switch the
operation guidance at the lower
part of the screen.
If no key entry is made within 3
minutes after the Table Cover is
opened, an alarm beeps and
the Table Cover is closed.
If [STOP] key is pressed while
the message “CANCEL” is
displayed, the Table Cover
remains open and the Standby
screen is restored.
After the Table Cover is closed,
a message shown at the right is
displayed.To restore the MAIN
MENU, press [STOP] key.
When [ENTER] key is pressed,
the Table Cover opens and the
Standby screen is restored.
▲
Set measurement No. or ID (if necessary).
ID of up to 13 characters can be set for each measurement. If ID setting is not
necessary, move on to procedure 6. Rack slides forward.
The Standby screen is displayed as shown at the right.
4.
Press [1] key on the Standby screen.
The measurement No. screen is
displayed.
Enter measurement No..
Up to 4 characters can be entered
using numbers.
Press [ENTER] key.
The entered measurement No. is
stored in memory and the ID entering
screen is displayed.
Enter ID. Up to 13 characters can be
entered using numbers, letters, and
symbols.
When the barcode reader is used, ID
is automatically read by the reader.
Press [ENTER] key.
The entered ID is stored in memory
and the Standby screen is restored.
●
●
●
●
●
●
●
●
2-4
測定結果
Chapter 2 MEASUREMENT
2-4-1 通常測定
S t a n d b y ２０００ー０６ー１０
I D（ １ ） I N F O（ ２ ）
Ｎｏ . ＜
ー
＞
▲▲
▲
▲
▲
▲
▲
2-20 ● SP-4430
C o v e r i s c l o s i n g .
S t o p（ S T O P ）
B a c k t o M E N U（ S T O P ）
B a c k t o M E A S（ E N T E R ）
▲
I D＜
ー
＞