Arkray SPOTCHEM EZ SP-4430, Руководство по эксплуатации

Страница: 122 / 139

C SP-4430 ● 5-05
4-1
お手入れの概要
Chapter 5 TROUBLESHOOTING
4-1-1 お手入れの目安
( 7 〜 9 ) : Single type
( M ) : Multi type
Channel with expired Reagent Strips in
either case.
The clock is not correctly adjusted.
The power was not connected for a long
time (battery is dead).
●
●
Readjust the date and time.
(see “3-6 Built-in Clock Adjustment”)
●
E31
Ｅ３１ Ｗｒｏｎｇ ｄａｔｅ／ｔｉｍｅ
■■■■■■■■■■■■ ＯＫ（ＥＮＴＥＲ）
●
●
●
●
Use a new Reagent Strip.
Adjust the clock.
Insert a new magnetic card.
●
●
●
E32
Description and error message Conditions and causes Remedy
Ｅ３２ Ｉｎｖａｌｉｄ ｓｔｒｉｐｓ
（ ■■ ７ ■■■■■ Ｍ） ■ ＯＫ（ＥＮＴＥＲ）
External light entered because the table
cover or maintenance cover was slightly
opened.
●
Close the table cover or the
maintenance cover firmly.
Change the direction of the
analyzer.
●
●
E33
Ｅ３３ Ｓｔｒａｙ ｌｉｇｈｔ
■■■■■■■■■■■■ ＯＫ（ＥＮＴＥＲ）
( 7 〜 9 ) : Single type
Channel which was misread.
The table is dirty.
The bar code was not correctly read
due to displacement or bending of the
Reagent Strip.
Foreign matter is attached to the Single
Reagent Strip.
●
●
●
Remove dust from the table.
Reset the Single Reagent Strip
correctly.
Confirm that foreign matter is not
attached to the Single Reagent
Strip.
●
●
●
E34
Ｅ３４ ＢＡＲ ｍｉｓｒｅａｄ
（９８７ ■■■■■■ ） ■ ＯＫ（ＥＮＴＥＲ）
The setting (such as baud rate) of the
hand-held bar code reader is incorrect.
The hand-held bar code reader is not
correctly connected.
●
●
Confirm the setting of the hand-
held bar code reader (such as baud
rate).
Connect the hand-held bar code
reader correctly.
●
●
E35
Ｅ３５ ＢＣＲ ｅｒｒｏｒ
■■■■■■■■■■■■ ＯＫ（ＥＮＴＥＲ）
Battery is exhausted.
●
Charge the battery.
●
E36
Ｅ３６ Ｂａｔｔｅｒｙ ｅｒｒｏｒ
■■■■■■■■■■■■ ＯＫ（ＥＮＴＥＲ）
Wear protective gloves in order to avoid exposure
to pathogenic microbes.
WARNING
The Reagent Strip has expired.
The clock is not correctly adjusted.
The clock is not correct because the
power was not connected for a long
time.
When using a Reagent Strips from new
lot, the corresponding magnetic card to
the lot of the was not inserted.