Arkray SPOTCHEM EZ SP-4430, Руководство по эксплуатации

Страница: 82 / 139

C SP-4430 ● 3-11
2-6
測定結果のみかた
Chapter 3 SUB MENU
Parameters can be printed by executing “Printing parameters”.
The formats are slightly different between Single Reagent Strips and
Multi Reagent Strips.
Version.
Printed date and time: The date and time when “printing of parameters” is executed.
From the left, item name, item symbol, lot number and expiry date.
Calibration type.
CARD means calibration by magnetic card and Cal. means calibration by calibrator kit.
Calibration factor
From the left, calibration mode (L&H, L, H), the number of calibration times, lot
number and calibration date.
Coefficient of system's difference correction(Coefficient to use in the measurement
calculates).
Temperature. Printed out as ….. for the items other than enzyme items.
Coefficient of correlation correction.
Coefficient set in the “Entering parameters” in the SUB MENU.
Measurement range. The lower limit and upper limit.
Standard range. The lower limit and upper limit.
Sample types. The lower limit and upper limit of standard range for each sample
types set. Printing is available only when sample type is set.
(1) Printing of single parameters
1 2
3
5
7
9
11
12
4
6
8
10
1
・
2 ・
3
・
4 ・
5 ・
6
・
7
・
8
・
9 ・
10 ・
11
・
12 ・
The lot number and calibration
date are printed only when
calibration by calibrator kit was
performed.
▲
▲
mark is not printed when the
upper limit of the standard
range is the same or higher
than the upper limit of the
measurement range.
▼
mark is not printed when the
lower limit of the standard
range is the same or lower than
the lower limit of the
measurement range.
▲