Arkray SPOTCHEM EZ SP-4430, Руководство по эксплуатации

Страница: 45 / 139

C SP-4430 ● 2-19
Check the lot number of Reagent Strips. 3.
2-4
測定操作
Chapter 2 MEASUREMENT
2-4-1 通常測定
Press [2] key on the Standby screen.
The Confirm screen is displayed,
which indicates information of
Reagent Strips stored in memory.
Check that the test items and lot
numbers of the Reagent Strips
match with those shown on the
screen (lot numbers are “XXXXXX” at
right). Lot number of a Reagent
Strip is printed on the rear side of
the aluminum foil package or on the
box.
●
●
To check numerous test items
at one time, print out the lot
numbers of all items.
Press [3] key on the Standby
screen to print out all the lot
numbers.
▲
【 Sー０１：G G T 】
（ １／３０ ）【 X X X X X X C A R D 】
Press [hyphen (-)] key to check the
information of the reagent strip you
are using.
When confirmation is completed,
press [STOP] key. The Standby
screen is restored.
●
●
Besides [hyphen (-)] key, [0], [2],
[4], [5], [6], and [8] keys can be
used in selecting items.
[0] -> initially displayed item
[2] -> last item
[4] -> previous item
[6] -> next item
[8] -> first item
[5] -> first item of the Multi
Reagent Strip
▲
If no key entry is made within 3
minutes after the Table Cover is
opened, an alarm beeps and
the Table Cover is closed.
If [STOP] key is pressed while
the message “CANCEL” is
displayed, the Table Cover
remains open and the Standby
screen is restored.
After the Table Cover is closed,
a message shown at the right is
displayed.
To restore the MAIN MENU,
press [STOP] key.
When [ENTER] key is pressed,
the Table Cover opens and the
Standby screen is restored.
▲▲
C o v e r i s c l o s i n g .
S t o p（ S T O P ）
B a c k t o M E N U（ S T O P ）
B a c k t o M E A S（ E N T E R ）
If the lot numbers of the Reagent Strips are different from those shown on
the screen, perform Calibration by magnetic card before measurement.
IMPORTANT
S t a n d b y ２０００ー０６ー１０
I D（ １ ） I N F O（ ２ ）