Arkray SPOTCHEM EZ SP-4430, Руководство по эксплуатации

Страница: 47 / 139

C
2-4
測定結果
Chapter 2 MEASUREMENT
2-4-1 通常測定
Set the sample type (when necessary).
Sample type can be set for each measurement. When sample type is not
registered or measurement is made on the setting of basic type, skip the following
and proceed to the Step 6.
5.
Press [6] key on the Standby screen.
The Sample type selecting screen is
displayed.
Press [hyphen (-)] key to select the
sample type to measure.
Press [Enter] key while the selected
sample type is displayed.
The selected sample type is set as
the measurement sample type and
the Standby screen is restored.
●
●
●
●
SP-4430 ● 2-21
No set-up is available where
sample type is not registered.
The registration can be made on
the Parameter Menu.
The sample type set for basic
type is established as an initial
value. No setting is needed
when not changed.
Besides [hyphen (-)] key, [4],
and [6] keys can be used in
selecting sample type.
[4] -> previous sample type
[6] -> next sample type
Pressing [Start] key on the
Sample type selecting screen
starts measurement with the
displayed sample type without
returning to the Standby screen.
▲▲
▲
▲
S t a n d b y ２０００ー０１ー１９
I D（ １ ） I N F O（ ２ ）
S t a n d b y ２０００ー０１ー１９
Ｓａｍｐｌｅ ［ Ｍａｎ ］
S t a n d b y ２０００ー０１ー１９
I D（ １ ） I N F O（ ２ ）
Set the Tip. 6.
Place the Tip in the Tip hole of the
Centrifuge-equipped Multi Rack
using a pair of tweezers.
●
Make sure that the Tip Waste Case
is set in position.
●
Do NOT touch the pointed end of
the Tip with fingers. If it is soiled,
correct measurement results may
not be obtained.
IMPORTANT