Arkray SPOTCHEM EZ SP-4430, Руководство по эксплуатации

Страница: 86 / 139

C SP-4430 ● 3-15
Chapter 3 SUB MENU
1-4
装置の設置
3-3-2 パラメータ設定
Press [ENTER] key.
The cursor moves to the entry
position for the number of times of
calibration. Any number from 2 to 6
(times) can be entered.
Press [ENTER] key.
The Standard range setting screen is
displayed.
●
●
Set the standard range. 6.
Enter the lower limit of the standard
range with the numeric keys.
Press [Enter] key.
The cursor moves to the entry
position for the upper limit value.
Enter the upper limit value with the
numeric keys.
Press [Enter] key.
The Entry check screen is displayed.
●
●
●
C a l . T y p e［ C A R D ］
Sー０１ N ＜ ２ ＞
N o r m a l L＜ ＿ １０＞
Sー０１ H＜ １５００＞
■
When sample type is not set
N o r m a l L＜ １０＞
Sー０１ H＜ ＿ １５００＞
S a v e？
Y e s（ S T A R T ） N o（ S T O P ）
Enter the lower limit value of the
standard range for the sample
type1.
Press [Enter] key to move the cursor
to a place for the upper limit value.
Enter the upper limit value with the
numeric keys and press [Enter] key.
Similarly, set the standard range for
sample types 2 to 5.
The Entry check screen is displayed.
●
●
●
●
■ When sample type is set
S a v e？
Y e s（ S T A R T ） N o（ S T O P ）
【 Ｍａｎ 】 L＜ １０＞
Sー０１ H＜ ＿ １５００＞
【 Ｍａｎ 】 L＜ ＿ １０＞
Sー０１ H＜ １５００＞
On the standard range entering
screen, a sample type is
displayed.
▲
When the sample type are set
only up to two, the standard
range entry for the sample
types 3 to 5 will be omitted.
▲
▲ mark is not printed when the
upper limit of the standard
range is the same or higher
than the upper limit of the
measurement range.
▼ mark is not printed when the
lower limit of the standard
range is the same or lower than
the lower limit of the
measurement range.
▲