Arkray AUTION MAX AX-4030 Скачать руководство пользователя страница 68

Страница: 68 / 206

AX-4030

AUTION MAX AX-4030 OPERATING MANUAL

2.2.3

Handling Test Strips

REFERENCE: Purchase the test strips specified for the instrument because the strips are not

supplied with the instrument.

■ Use only test strips specified for the instrument.

“AUTION Sticks 9EB” are available for use with the instrument. Carefully read the package insert

and observe the expiration date.

■ Check the test strips before use.

Do not use the test strips beyond the expiration date or test strips having discolored pad area even if

they are within the expiration date.

■ Prepare the test strips just before testing.

Take as many test strips as you need out of the bottles and load them into the feeders just before

testing. Each feeder can contain up to 200 test strips (equivalent to 2 bottles), but the quality of the

strips is assured only for 3 days. Test strips absorb moisture in the air, which may alter their quality

and produce incorrect results. The test strip bottles should be securely capped immediately after

taking out the strips.

■ Do not touch the pad area on the test strips.

Touching the test strips can cause sebum to adhere to the surface, whereby producing incorrect

results.

■ Correctly set the type of test strip to be used by key operation.

Before carrying out measurement, set the type of the test strip you are to use by key operation. An

incorrect test strip setting can produce incorrect results.

Содержание AUTION MAX AX-4030















































































































































































































Результаты поиска

Содержание AUTION MAX AX-4030

Отзывы:

Похожие инструкции для AUTION MAX AX-4030

Бренды по названию

Популярные бренды

Arkray AUTION MAX AX-4030, Руководство по эксплуатации

Результаты поиска

Содержание AUTION MAX AX-4030

Отзывы:

Похожие инструкции для AUTION MAX AX-4030

Бренды по названию

Популярные бренды