6
1
risks and protections before assembLy
All installation works must be done with battery disconnected, using suitable tools and any individual protection equipment
deemed necessary.
Use ONLY clean water for treatment tests and simulations: using chemicals during simulated treatment runs can seriously injure
persons in the vicinity.
2
bravo dsb
ARAG has designed and manufactured a diagnostics system for Bravo series computers and the systems they may be connected to.
BRAVO DSB
(code 467003)
provides reliable diagnostics of computer, control unit or the whole system to troubleshoot any potential problems
experienced with the BRAVO DSB system.
3
intended use
The device you have purchased is a computer which, when connected to a valve or suitable control unit, makes it possible to control all phases of
treatment in agricultural applications directly from the cabin of the farming machine it is installed in.
This device is designed to work on agricultural machinery for crop spraying applications.
The machine is designed and built in compliance with EN ISO 14982 standard (Electromagnetic compatibility - Forestry and
farming machines), harmonized with 2004/108/EC Directive.
4
precautions
• Do not aim water jets at the equipment.
• Do not use solvents or fuel to clean the case outer surface.
• Do not clean equipment with direct water jets.
• Comply with the specified power voltage (12 Vdc).
• In case of voltaic arc welding, remove connectors from BRAVO and disconnect the power cables.
• Only use ARAG genuine spare parts and accessories.
5
package content
The table below indicates the components that you will find in the BRAVO computer package:
Fig. 1
BRAVO 300S COMPUTER WITH DIRECT CONNECTION
Legend:
1
Bravo 300S
2
Instruction manual
3
Power cable
4
SD memory card
5
Fixing kit
6
Power supply connector
7
Complete harness to connect valves and sensors
8
Inductive speed sensor
9
Section valve connector seals
Fig. 2
BRAVO 300S COMPUTER WITH RCU
Legend:
1
Bravo 300S
2
Instruction manual
3
Control unit (RCU)
with harnesses
3a
Connection cable to the hydraulic unit
3b
Connection cable to the control unit
3c
Connection cable to power supply and
sensors
3d
Connection cable to monitor
4
SD memory card
5
Fixing kit
6
Inductive speed sensor
7a
Section valve connector seals
7b
Hydraulic valve connector seals
8
Power supply connector
INSTALLATION
