40
WORK FUNCTIONS
Par.9.3
Quick reset of
change
Menu item scrolling or
Data increase/decrease
Confirms access to menu
or data change
Quits the menu or
data changes
12.2
F2 - Current job data
(page 1)
Displays the data of the current treatment.
standard Job data (defauLt)
Job data with
recovered fLuid count (par. 10.9.3)
Select
to save
Fig. 109
Select
to save
Fig. 110
Consider that:
• Each time you enter the
Job's data
function, Bravo 300S displays the current job data.
• Some countings activate ONLY in determined conditions:
time counting
enabLed
sprayed area
counting
enabLed
distance traveLed
counting
enabLed
Master ON
Master ON
+
Rate ON
Master OFF
• saving the data on sd card
- Select the item
Save to SD card
and press
OK
.
The current job report will be saved in the file indicated on the display (
b
in Fig. 109).
12.3
F3 - Zero transducer setup
(page 1)
Activate the “zero” calibration procedure of pressure sensor.
In case a pressure value is displayed
despite the absence of pressure inside the circuit,
it is
necessary to perform zero setup of the sensor:
Fig. 111
- Press
OK
to reset the pressure sensor residual signal.
Bravo 300S automatically quits the procedure and displays the job screen with the pressure value of
0.0 bar
.
Signal out of range! Check transducer
Faulty pressure values detected: check the transducer operation.
If problem persists, check for residual pressure in the system.
