22
Par.9.3
Quick reset of
change
Menu item scrolling or
Data increase/decrease
Confirms access to menu
or data change
Quits the menu or
data changes
Application systems:
• section
1
sprays on one complete row and on one side of the next row (Fig. 47 - set value
1.50 Rows
);
Fig. 47
• section
1
sprays on one complete row (Fig. 48 - set value
1.00 Rows
);
• section
2
sprays only on one side of the row (Fig. 48 - set value
0.50 Rows
);
Fig. 48
10.8
Valves
Select
one item
Fig. 49
Enable automatic switch-off
Automatic switch-off configuration alarm
Set the type of valves installed on the system and the relevant data.
> Boom section
: indicate the type of installed valves.
2 ways
: valve without calibrated backflows
3 ways
: valve with calibrated backflows
> Automatic switch-off
Indicate the section valve operation mode, especially if the section automatic closing is active when the
main control valve is closed.
No (P mode)
Yes (M mode)
It is compulsory to set the M mode (option
Yes
) when no main valve (
None
)
is
present
in the system.
> Pressure regulator
: indicate the type of installed control valve.
2 ways
3 ways
> Master
: indicate the type of installed main control valve.
2 ways
: drain valve
3 ways
: main valve
None
• “P” operation mode (option
No
):
The section valves are controlled independently.
Main switch control functions do not affect section valve
opening or closing.
• “M” operation mode (option
Yes
):
The section valves are closed or opened by acting on the
main switch provided the section valve specific switch is in
the correct position, i.e. if the section switches are set to OFF
(lever down), by acting on the main switch the sections will
not be controlled.
If one or more section valve switches are set to ON (lever
up), opening or closing the main switch opens or closes the
section valves as well.
ADVANCED SETUP
