10
INSTALLATION
6.2
Monitor and control unit positioning
•
The
BRAVO 300S series computer must be placed in the control cabin of the farming machine. Observe the following precautions:
- Do NOT install the monitor in areas where it would be subjected to excessive vibrations or shocks, to prevent any damage or
accidental use of the control keys;
- Install the device in a visible position within easy reach by hand; bear in mind that the computer should not obstruct the
operator’s freedom of movement or block his view.
• Control unit (RCU): secure the control unit on the back of the machine, close to the control unit and the hydraulic unit.
Consider all necessary connections of the computer, the cable length, and make sure there is enough space for connectors and
cables.
An identification symbol is located next to each connector to indicate its function. For any reference to the system configuration
read Par. 6.1 System recommended composition.
Fig. 9
Fig. 10
Fig. 11
item
monitor connection points
1
Control unit and sensors
2a
Power supply
2b
Monitor power supply
+
RCU connection
3
Auxiliary connections
4
SD memory card
item
rcu connection points
5
Monitor
6
Power supply and sensors
7
Control unit
8
Hydraulic unit
