Operation
Page 131 of 178
Figure 6.18
–
PanelView reading Logix data over Scheduled ControlNet
6.7.2.
P
ANEL
V
IEW
W
RITING
D
ATA
T
O
L
OGIX
The PanelView will write to N7 when sending integer values to Logix, and F8 when sending
floating/real values. The data being read by the Logix Controller from the
MappedData
tag of
the Input Assembly UDT will be copied from both file N7 and F8 respectively, but in N7 the
data is formatted for integers, while in F8 the data is formatted for real values. Below is a
diagram of the PanelView writing data to the Logix Controller over Scheduled ControlNet
using the PLC5 emulation.