APARIAN ControlNet Router A-CNR, Руководство пользователя

Страница: 101 / 178

Setup
Document No. D138-016 Page 101 of 178
Revision 1.1
The destination instance will be the Modbus register type required.
Figure 3.127 – IDS Copy - Modbus Destination Instance
The Destination Offset is the Modbus Register offset to where the data must be copied. The
Count is the number of
bytes that will be copied.
3.7.2.5. CNET TARGET
When copying data from the Ethernet interface to the ControlNet Target input assembly, the
destination type needs to be CNet Target.
Figure 3.128 – IDS Copy – ControlNet Target Destination Type
The destination instance will be the connection number, which in this case is always
Connection 0 . The Destination Offset is the offset in the Mapped Data section of the
ControlNet input assembly from where the data must be copied. The Count is the number of
bytes that will be copied. The Mapped Data section will be available when using the provided
UDT for the Input Assembly.
Figure 3.129 – ControlNet Input Mapped Data UDT