Setup
Page 48 of 178
The user can then modify the
Connection Name
,
Path
and
RPI
as required.
3.5.2.2.
CONTROLNET EXPLICIT MESSAGE DEVICE CONNECTIONS
Up to 10 ControlNet devices can be added for explicit unscheduled messaging. The user will
need to add each device as explained in the ControlNet Devices section below. Once the
ControlNet devices have been added the user can then configure the required mapping for
the ControlNet Explicit messaging as shown in ControlNet Map section below.
A.
CONTROLNET DEVICES
This tab is enabled when the ControlNet Mode is set to
ControlNet Originator
.
The ControlNet Devices configuration is shown in the figure below. Up to 10 ControlNet
devices can be configured with up to 50 ControlNet mapped items allowing for explicit
Unscheduled Unconnected Messaging (UCMM) to any of the 10 configured devices. The data
from each ControlNet device is written to, or read from, an Internal Data Space with a size of
100Kbytes. See the
Explicit ControlNet Messaging
section for more details.
The ControlNet Devices configuration window is opened by either double clicking on the
module in the tree or right-clicking the module and selecting
Configuration
.
Figure 3.43
–
ControlNet Device configuration
