AND Check Weighing Indicator AD-4404, Инструкция по эксплуатации

Страница: 61 / 162

Page 59
8.12.2. 8.12.2. 8.12.2. 8.12.2. Output to Selectors Output to Selectors Output to Selectors Output to Selectors
The output is used to control the selector using the timer.
A maximum of six selectors can be connected to the AD-4404.
Output according to conditions and timers.
Selector 1 condition
[
5q f-22
]
Selector 2 condition
[
5q f-23
]
Selector 3 condition [
5q f-24
]
Selector 4 condition
[
5q f-25
]
Selector 5 condition [
5q f-26
]
Selector 6 condition
[
5q f-27
]
Selector 1 condition
[
5q f-22
]
When the interval is short and the distance between the weighing conveyor and
selector is long, a maximum of ten judgements will be stored into memory for each
selector.
Therefore each selector can be stored ten suits of judgement, the output delay timer
and output timer. At maximum, sixty suits of data can be stored in the six selectors.
Eval delay timer
Selection out 1 delay timer
Net
Average timer
0
Select output 1 timer
Selection out 1 delay timer
Select output 1 timer
Selection out 1 delay timer
Select output 1 timer
Selection out 1 delay timer
Select output 1 timer
Judgement
Judgement Judgement
5q f-43
5q f-44
5q f-46
5q f-52
Judgement
5q f-46
5q f-52
5q f-46
5q f-52
5q f-46
5q f-52