AND Check Weighing Indicator AD-4404, Инструкция по эксплуатации

Страница: 117 / 162

AD-4404 Page 115
10.
10. 10.
10. Maintenance
Maintenance Maintenance
Maintenance
(Monitor (Monitor (Monitor (Monitor and Test) and Test) and Test) and Test)
10.1.1. 10.1.1. 10.1.1. 10.1.1. Basic Operation Basic Operation Basic Operation Basic Operation
To enter the maintenance function Press and hold the ENTER key and press the
key in the weighing mode.
Select the menu
Check
using the key and
the ENTER key..
To select an address of the parameter Press the , SHIFT + , ENTER , ESC keys.
To change the parameter Press the , SHIFT + , Alphanumerical ,
ENTER , ESC keys.
To exit the mode Press the ESC key.
(To return to the weighing mode)
10.2. 10.2. 10.2. 10.2. Monitor Mode Monitor Mode Monitor Mode Monitor Mode
The monitor mode is used to check the indicator during the weighing sequence.
10.2.1. 10.2.1. 10.2.1. 10.2.1. Monitoring the Control I/O Function Monitoring the Control I/O Function Monitoring the Control I/O Function Monitoring the Control I/O Function
Used to monitor the status of the I/O terminals. If the rate is faster than the Display
refresh rate
[
genf-01
] it can not be displayed.
0
: The inactive status to open the open collector of the output.
1
: The active status to short the open collector of the output.
10.2.2. 10.2.2. 10.2.2. 10.2.2. Monitoring Built Monitoring Built Monitoring Built Monitoring Built----in RS in RS in RS in RS----485 Interface 485 Interface 485 Interface 485 Interface
The current communication data is displayed. Output is according to Communication
mode [
r5 f-02
].
: CR
: LF
123
kg
CONTROL 00010001000
a11 a1
I/O 00110100001
b11 b1
Input terminal A1
Output terminal B1
Sent data
123
kg
RNET
RNET0099,1234567,123456789
r5-485 rcu and 5nd
Received data Parity error:
p
Framing error:
f