AND Check Weighing Indicator AD-4404, Инструкция по эксплуатации

Страница: 118 / 162

Page 116 AD-4404
10.2.3. 10.2.3. 10.2.3. 10.2.3. Monitoring Built Monitoring Built Monitoring Built Monitoring Built----in Current L in Current L in Current L in Current Loop Output oop Output oop Output oop Output
The current communication data is displayed. Output is according to Communication
mode [
Cl f-02
].
: CR
: LF
10.2.4. 10.2.4. 10.2.4. 10.2.4. Monitoring A/D Converter Monitoring A/D Converter Monitoring A/D Converter Monitoring A/D Converter
The current A/D converter data is displayed.
10.2.5.
10.2.5. 10.2.5.
10.2.5. Monitoring BCD Output of OP
Monitoring BCD Output of OP Monitoring BCD Output of OP
Monitoring BCD Output of OP----01
01 01
01
The current BCD output data is displayed.
0
: The inactive status to open the open collector of the output.
1
: The active status to short the open collector of the output.
The print strobe is displayed in the original logic level.
10.2.6. 10.2.6. 10.2.6. 10.2.6. Monitoring Rela Monitoring Rela Monitoring Rela Monitoring Relay Output of OP y Output of OP y Output of OP y Output of OP----02 02 02 02
The status of the current relay outputs is displayed. If the rate is faster than the
Display refresh rate
[
genf-01
] it can not be displayed.
0
: The inactive status to open the relay.
1
: The active status to short the relay.
16.001
kg
Int.Count CAL:DS
160008
Internal count
Calibration
EN: Enable
DS: Disable
12345
kg
OP-01 001111000100011011
a18 a1
001001000001010000
b18 b1
A1
B1
A18
Print strobe
B18
Hold input
123
kg
OP-02 0001 10100
10 7 5 1
Output terminal
1 ~ 5
Output terminal
7 ~ 10
Sent data
123
kg
ST,NT,+012.345kg
C loop 5nd